Cảm biến đo dịch chuyển (Displacement Transducers)
Cảm biến đo dịch chuyển Geokon 4430
Giá mời liên hệ
The Model 4430 Deformation Meter with flanged ends is designed to measure longitudinal deformation in dams and embankments. It can also be grouted or held in place by hydraulic anchors to measure deformations in boreholes (over the gage length). Gage lengths from 0.5 to 100 meters are available.
Standard Range¹
|
25, 50, 100, 150, 300 mm
|
Resolution²
|
0.025% F.S.
|
Accuracy³
|
±0.1% F.S.
|
Nonlinearity
|
<0.5% F.S.
|
Temperature Range¹
|
−20°C to +80°C
|
Length × Diameter
|
1 m (standard); varies × 27 mm (pipe), 51 mm (flange)
|
¹Other ranges available on request.
²Resolution depends on readout equipment.
³Transducer accuracy established under laboratory conditions.
The Model 4430 Deformation Meter with flanged ends is designed to measure longitudinal deformation in dams and embankments. It can also be grouted or held in place by hydraulic anchors to measure deformations in boreholes (over the gage length). Gage lengths from 0.5 to 100 meters are available.
Standard Range¹
|
25, 50, 100, 150, 300 mm
|
Resolution²
|
0.025% F.S.
|
Accuracy³
|
±0.1% F.S.
|
Nonlinearity
|
<0.5% F.S.
|
Temperature Range¹
|
−20°C to +80°C
|
Length × Diameter
|
1 m (standard); varies × 27 mm (pipe), 51 mm (flange)
|
¹Other ranges available on request.
²Resolution depends on readout equipment.
³Transducer accuracy established under laboratory conditions.