Cảm biến đo ứng suất (Pressure Cells)
Cảm biến đo ứng suất đáy móng Geokon 4855
Giá mời liên hệ
Pile Tip Type (VW) | Model 4855
The Model 4855 Pile Tip Pressure Cell* is used to measure pile-tip loads in cast-in-place concrete piles (caissons). Like the Model 4810, the Pile Tip Pressure Cell has a thick upper plate. The cell is manufactured to be close to the diameter of the pile and the back plate is supplied with hooks or sections of rebar to allow the cell to be connected to the bottom of the reinforcement cage. A vibrating wire pressure transducer is connected to the cell to provide some redundancy in the event that one transducer is damaged during installation. An added feature is a remote re-pressurization mechanism to allow the cell to be inflated slightly so as to ensure good contact between the cell and the surrounding concrete.
Standard Ranges¹
|
2, 3, 5, 7.5, 10, 20 MPa
|
Over Range
|
150% F.S. (maximum)
|
Resolution
|
0.025% F.S.
|
Accuracy²
|
±0.1% F.S.
|
Temperature Range¹
|
−20°C to +80°C
|
Height × Diameter¹
|
50 × 600 mm
|
¹Other ranges and sizes available on request.
²Transducer accuracy established under laboratory conditions.
Total system accuracy (pressure transducer + pressure cell) is subject to site-specific variables.
Pile Tip Type (VW) | Model 4855
The Model 4855 Pile Tip Pressure Cell* is used to measure pile-tip loads in cast-in-place concrete piles (caissons). Like the Model 4810, the Pile Tip Pressure Cell has a thick upper plate. The cell is manufactured to be close to the diameter of the pile and the back plate is supplied with hooks or sections of rebar to allow the cell to be connected to the bottom of the reinforcement cage. A vibrating wire pressure transducer is connected to the cell to provide some redundancy in the event that one transducer is damaged during installation. An added feature is a remote re-pressurization mechanism to allow the cell to be inflated slightly so as to ensure good contact between the cell and the surrounding concrete.
Standard Ranges¹
|
2, 3, 5, 7.5, 10, 20 MPa
|
Over Range
|
150% F.S. (maximum)
|
Resolution
|
0.025% F.S.
|
Accuracy²
|
±0.1% F.S.
|
Temperature Range¹
|
−20°C to +80°C
|
Height × Diameter¹
|
50 × 600 mm
|
¹Other ranges and sizes available on request.
²Transducer accuracy established under laboratory conditions.
Total system accuracy (pressure transducer + pressure cell) is subject to site-specific variables.