Cảm biến đo biến dạng (Strain Gages)
Cảm biến đo biến dạng (VW) GEOKON 4100-4150
Giá mời liên hệ
Cảm biến đo biến dạng (strain gage) Geokon 4100-4150
The Model 4100/4150 Strain Gage has a 51 mm gage length (3000 µε range, 1 µε sensitivity) and is designed to measure strains in steel structures (4100) and on reinforcement bars (4150) where space may be limited. The gage is installed quickly and easily by means of a capacitive discharge spot welder or, for short-term use, with special epoxy adhesives; the latter method of attachment permits the use of this gage on concrete.
Standard Range | 3000 µε |
Resolution
|
0.4 µε |
Accuracy¹ | ±0.5% F.S. |
Nonlinearity | <0.5% F.S. |
Temperature Range² | −20°C to +80°C |
Active Gage Length | 51 mm |
¹±0.5% F.S. with standard batch calibration. ±0.1% F.S. with individual calibration.
Accuracy established under laboratory conditions.
²Other ranges available on request.
Cảm biến đo biến dạng (strain gage) Geokon 4100-4150
The Model 4100/4150 Strain Gage has a 51 mm gage length (3000 µε range, 1 µε sensitivity) and is designed to measure strains in steel structures (4100) and on reinforcement bars (4150) where space may be limited. The gage is installed quickly and easily by means of a capacitive discharge spot welder or, for short-term use, with special epoxy adhesives; the latter method of attachment permits the use of this gage on concrete.
Standard Range | 3000 µε |
Resolution
|
0.4 µε |
Accuracy¹ | ±0.5% F.S. |
Nonlinearity | <0.5% F.S. |
Temperature Range² | −20°C to +80°C |
Active Gage Length | 51 mm |
¹±0.5% F.S. with standard batch calibration. ±0.1% F.S. with individual calibration.
Accuracy established under laboratory conditions.
²Other ranges available on request.